Honeywell VRX180 - Manual (Page 100)

Programming Function Blocks and Features
Video Recorder – User Manual 86
Table 4-4 Other Labels
Prompt Range/Selections Definition
UNIT Enter up to 16 characters to specify a
label for the instrument. The unit name appears on all Data Storage
floppy disks coming from this instrument.
ENGINEERING
UNITS
Enter up to 4 characters to change
available engineering units from the
defaults: You can change the 25 engineering units
available in Table 4-3 as UNITS.
PSI DEGR
BAR K
MW MV
GPH V
GPM OHM
GPS HZ GAL MA
LPH %
LPM PH
LPS KG
LITR GRAM
DEGC LB
DEGF To reset the 25 engineering units to their
defaults, select RESET DEFAULTS.
FILENAMES Enter up to 6 characters to change
available filenames from these defaults:
FILE CYCLE DRYER
PROD RECORD TANK
UNIT LOOP REACTR
CONFIG KILN VESSEL
CALIB WCHEM PRESS
FURNCE DEMIN CONTRL
BATCH FERMTR LEHR
LINE STRLZR OVEN
ZONE
These filenames will appear as choices on
other menus.
To reset the filenames to their defaults,
select RESET DEFAULTS.