Honeywell VRX180 - Manual (Page 206)

Setpoint Profiler
Video Recorder – User Manual 192
Table 5-4 Setpoint Profiles Prompts (continued)
Prompt Range/Selections Definition
LOAD PROGRAM
FROM DISK
Files with .LNS extension. Select a program to load into the Setpoint
Profiler function block. Press Enter to load.
Existing profiles in the instrument will be
replaced by the profiles in the program being
loaded.
Example
You are loading Program1.LNS which
contains Profiles #1, #2, and #3. These
profiles will replace the profiles currently set
up in the instrument. Profile #4 will not be
replaced.
LOAD PROGRAM
FROM MEMORY
PROGRAM NUMBER Select a program 1-96 to load into the
Setpoint Profiler function block.
There are up to 96 “slots” allotted for program
memory storage. Depending on how many
profiles your instrument has, each program
will contain a certain number of profiles.
See How programs are stored in memory on
page 198 for details.
Program
Memory Profile
Function
Block
Floppy
Disk
Not allowed
Figure 5-13 Allowable and Non-Allowable Program Storage