Honeywell VRX180 - Manual (Page 219)

Setpoint Profiler
Video Recorder – User Manual 205
How to view event status
Table 5-18 Event Viewing Procedure
Step Action Result/Notes
1 Perform steps 1 and 2 from Start procedure
(Table 5-13). Profile menu is displayed.
2 Press Decrement button to move cursor to
Events. Press Enter. Live On/Off status of all 16 events are displayed.
If Events change status, they do so at the
beginning of the segment and Hold the status
during the entire segment.
1-ON
2-ON
3-OFF
4-OFF
5-OFF
6-OFF
7-OFF
8-OFF 9-OFF
10-OFF
11-OFF
12-OFF
13-OFF
14-OFF
15-OFF
16-OFF
EVENTS
How to view profiler details
Table 5-19 Details Viewing Procedure
Step Action Result/Notes
1 Perform steps 1 and 2 from Start procedure
(Table 5-13). Profiler menu is displayed.
2 Press Decrement button to move cursor to
Detail. Press Enter. Shows:
•
Elapsed time since profile was started,
including time spent in Hold.
•
Segment time remaining.
•
Profile length in seconds.
•
PV #2 value.
PV #2 538.67
ELAPSED TIME 1:10:56
STIME REMAIN 0:09:10
LENGTH (SECS) 3900