Honeywell VRX180 - Manual (Page 221)

Setpoint Profiler
Video Recorder – User Manual 207
How to edit a profile’s segments
Profile may be in Run, Ready, End, or Hold to edit segments.
CAUTION
For value duration ramp type, it is recommended you do not edit the currently running segment or the next
segment. Doing so may prematurely terminate the segment, that is, the profiler may jump to the next
segment.
Table 5-21 Segment Editing Procedure
Step Action Result/Notes
1 Perform steps 1 and 2 from Start procedure
(Table 5-13). Profiler menu is displayed.
2 Press Decrement button to move cursor to
Edit. Press Enter. The Edit Profile menu is displayed:
EDIT PROFILE #n
SEGMENT #n
NEXT SEGMENT
PREVIOUS SEGMENT
VALUE 100.00
AUX VALUE 50.00
TIME 20.000
The profile and segment numbers whose value
and time you are editing are shown.
3 Use Increment and Decrement buttons to
move cursor to value or time. Press Enter to
access the numbers shown. Change the
numbers with the Increment and Decrement
buttons. Numbers are changed to their new values.
4 Press Menu button when finished editing
segments. The Profile Trend is displayed with the new
segments.