Honeywell VRX180 - Manual (Page 241)

Online Operation Using Menus
Video Recorder – User Manual 227
ATTENTION
If you are replaying data from a “non-current disk,” keep in mind that the instrument will continue acquiring
data and holding it temporarily in its active memory (RAM) until you insert a proper disk for storage. If you
spend too much time replaying data, the instrument could run out of active memory space. If this occurs, a
storage full warning message will be displayed. See Tables 6-6 and 6-7 for an explanation of the various
warning messages.
Examining replay data
For details on examining replay trend data, see Section 6.2, Interacting With Primary Displays. To
examine replayed alarms, events, and diagnostics, use the Up Arrow or Down Arrow keys.
Reading Data Storage Messages
See Data Storage Messages in Table 6-6 for message descriptions.