7 set mode, 8 review programming – Honeywell VRX180 User Manual
Page 256
Advertising
Online Operation Using Menus
Video Recorder – User Manual
242
7.7 Set Mode
Select this item to change the operating mode of the instrument to Program or Maintenance. These
operating modes are discussed in Sections 4, 5, and 8.
7.8 Review Programming
This item is visible only if enabled under Enable Features in the Program mode.
Select this item to see how the instrument is configured. You can view all Program mode menus as if
you were in Program mode, but you cannot change anything.
Advertising