Honeywell VRX180 - Manual (Page 267)

Diagnostic and error messages
Video Recorder – User Manual 253
Table 9-2 Internal Error Messages (continued)
Error message Suggested Action
SLOT CARD FAILURE 1. Check for noise.
2. Check AI card connection.
3. Replace AI card.
STORAGE FAILURE 1. Check for bad floppy disk.
2. Run disk diagnostic on the disk drive.
3. Check seating of floppy cables.
4. Replace CPU.
DATA STORAGE STATUS
LOST 1. Check for bad floppy disk.
2. Run disk diagnostic on the disk drive.
3. Check seating of floppy cables.
4. Replace CPU.
RJ FAILURE 1. Check reference junction sensor connection.
2. Check AI card.
3. Replace CPU.
CLOCK FAILURE 1. Reprogram clock.
2. Reset unit.
3. Change lithium battery on interconnection board.
4. Replace CPU.
CLOCK RESET 1. Reprogram clock.
2. Reset unit.
3. Change lithium battery on interconnection board.
4. Replace CPU.
TIMING ERROR 1. Reprogram clock.
2. Reset unit.
3. Change lithium battery on interconnection board.
4. Replace CPU.
TASK ERROR 1. Reset unit.
2. Clear configuration and reload.
3. If message recurs, replace CPU.
RAM ERROR 1. Run RAM diagnostic.
2. Replace CPU.
COMM PORT ERROR 1. Check communications card seating.
2. Replace communications card.
3. Replace CPU.