Section 5:multiplexer control functions, 1multiplexer mode, 2menus – Honeywell HJZTP User Manual
Page 31: 1setup (top) menu, Section 5: multiplexer control functions, Multiplexer mode, Menus, Setup (top) menu
Rev. 1.01
21
900.0570
8-Sept-05
SECTION 5:
MULTIPLEXER CONTROL FUNCTIONS
5.1 MULTIPLEXER MODE
Press the ‘mode’ key to toggle between multiplexer and DVR mode.
5.2 MENUS
Navigation around menus is achieved by using the function keys as indicated in the
following table
Key
Function
F1 (▲)
Up
F2 (▼)
Down
F3 (◄)
Left
F4 (►)
Right
F5 (enter)
Set
F6 (menu)
Esc
Note: Menus are not accessible to users logged in as user level 2 (U2 displayed on the
LCD).
5.2.1 Setup (Top) Menu
To enter the multiplexer set-up menu press the ‘F1’ (‘▲’
)
key twice to display:
LIVE
Playback
Preview
Setup
Cancel
Use the ‘F3’ (‘◄’
)
or ‘F4’ (‘►’
)
keys to select ‘Setup’, then press ‘F5’ (‘enter’).
Press the ‘F1’ (‘▲’
)
, ’F2’ (‘▼’
)
, ‘F3’ (‘◄’
)
or ‘F4’ (‘►’
)
keys to move around the menu
pages.
Press the ‘F5’ (‘enter’) key to select an option within the menus.
To exit the menus select ‘Exit’, and then press the ‘F5’ (‘enter’) key.