6preshots, Preshots – Honeywell HJZTP User Manual

Page 52

Advertising
background image

Rev. 1.01

42

900.0570

8-Sept-05

8.6 PRESHOTS

When using Maxpro mode, there are several PreShots (views or presets) reserved for
controlling and programming the scan. Refer to Table 1 for a listing of the
preprogrammed PreShots and their functions.

Program PreShots as described Section 7.7 and send the KD6i/HD6i to PreShots as
described in Section 7.8.

The PreShots reserved for scan setup, programming, and control functions cannot be
programmed and cannot be included in VectorScans.

Table 1:

Preprogrammed Preshots

KD6/HD6 (Maxpro Mode)

PreShot 80

Run PTZ Tour 1

PreShot 81

Run PTZ Tour 2

PreShot 82

Run PTZ Tour 3

PreShot 83

Program PTZ Tour 1

PreShot 84

Program PTZ Tour 2

PreShot 85

Program PTZ Tour 3

PreShot 86

Terminate PTZ Programming Mode

PreShot 87

Start VectorScan 1

PreShot 88

Start VectorScan 2

PreShot 89

Start VectorScan 3

PreShot 90

Setup the Scan and Camera (OSD Menus)

PreShot 91

Toggles the error table display

PreShot 92

Toggles auto exposure ON and OFF. (Factory default is ON.)

PreShot 93

Toggles backlight compensation ON and OFF. The unit must be in auto
exposure mode for backlight compensation to function.

PreShot 94

Toggles between standard operation and NightShot mode. (Camera
models 843216-1011, 843216-1013, 843216-0984, and 843216-0985 only.)

PreShot 95

Toggles between freeze and unfreeze video

PreShot 96

Invokes the Flashback Function

PreShot 97

Reserved

PreShot 98

Camera/Scan Reset

PreShot 99

Reserved

Advertising
This manual is related to the following products: