Honeywell ST6300 - Manual (Page 2)

ELECTRONIC PROGRAMMER ST6300
■
Installation
ST6300 can be either surface or flush
switch box mounted, for both of which
fixing screws are supplied. The wiring
sub-base has holes to suit single
switch boxes and breakouts for
surface wiring and mini-trunking.
When wiring is completed the plug-in
module is fitted onto the sub-base
and secured by tightening the
retaining screws.
■
Ordering Specification
ST6300A1007
Electronic programmer having two
ON/OFF periods with separate outputs
for heating and hot water circuits.
■
Wiring
■
Specification
Switch Type : Single Pole Double Throw (SPDT)
Switch Rating : 3(3)A
Timing Accuracy : ±1 min/month
Timing Resolution : Time of Day 1 minute
: Programme Times 10 minutes
Ambient Operating
Temperature
: 0-50˚C
Power Reserve : Minimum 4 days
Weight : 330g approx (including wall plate)
Earthing : Double Insulated
Battery Back-Up : Integral battery with built-in charging circuit
Standards : Complies with BS EN60730-2-7
EC Directive : Conforms to 89/336/EEC & 73/23/EEC
■
Dimensions (mm)
A
B
C
D
A B C D
145 95 45 120
ST 6300
Clock
OFF OFF
ON ON
CH ON
CH OFF
HW ON
TIMED OUTPUTS
HW OFF
N L 1 2 3 4
3 AMPS MAX
N
L
230V~
50...60Hz