Turning on the power, Live monitoring – Honeywell HRSD16 User Manual

Page 104

Advertising
background image

Operation

104

Turning on the Power

After installing the DVR (see

Chapter 2, Installation

), press POWER on the front panel

to start recording video.

Live Monitoring

As soon as the DVR completes its initialization process, live video shows on the
attached monitor. The default mode is to display all connected cameras at once.

To display live video full screen, press that camera button. The input of the chosen
camera displays until you enter another mode.

To cycle the DVR through the different display formats, press DISPLAY.

The DVR can be set to display full-screen video for a preset dwell time when an Event
occurs. Video from the lowest numbered camera associated with the event sensor is
displayed. The DVR returns to the previous screen format after the event monitoring
dwell time expires. While the event monitoring is activated, the monitoring for all other
subsequent events are ignored.

To release the current event monitoring and display the selected camera or to return to
the previous screen format, press individual camera buttons or DISPLAY during event
monitoring.

10

ALARM Button

11

CLIP COPY Button

12

PANIC Button

13

PLAYBACK Button

14

HDD LED

15

Network LED

16

Power LED

17

USB Connectors

Table 4-1

Front Panel Controls

#

Function

#

Function

#

Function

Advertising