Recording, Recording video, Exiting the ptz mode – Honeywell HRSD16 User Manual

Page 115: Panic recording

Advertising
background image

Operation

Document 800-00918

Rev F

115

02/08

Exiting the PTZ Mode

Press PTZ to exit the PTZ mode.

Recording

Recording Video

After you have installed the DVR following the instructions in

Chapter 2, Installation

, it is

ready to record. The DVR starts recording based on the settings you made in the
Record setup screen. See

Chapter 3, Configuration

.

Recycle On

or Recycle

Off

The DVR records over the oldest video once the hard disk is full. The factory default is
Recycle On. Setting the DVR to Recycle Off causes it to stop recording once the hard
disk is full.

Standard or

High

When set to Standard (factory default), the DVR has a maximum recording speed of 120
ips. When set to High, the DVR has a maximum recording speed of 60 ips.

Panic Recording

Pressing PANIC starts panic recording of all cameras, and pressing the button again
stops panic recording. If you set the Panic Recording Duration in the Record Screen,
panic recording stops automatically according to the preset duration as long as PANIC
is not pressed.

Exit the toolbar

Click the empty space under and drag the toolbar to where you want it
located.

To re-display the toolbar, position the mouse pointer at the bottom of the
screen.

Table 4-5

PTZ Toolbar Tools

Icons

Action

Advertising