Honeywell HRSD16 - Manual (Page 143)

Troubleshooting
Document 800-00918 Rev F 143
02/08
E
Troubleshooting
Problem Possible Solution
No Power • Check power cord connections.
• Confirm that there is power at the outlet.
No Live Video • Check camera video cable and connections.
• Check monitor video cable and connections.
• Confirm that the camera has power.
• Check camera lens settings.
Live Video Very Bright If a cable is attached to the Loop connector, make
certain it is connected to a properly terminated
device.
DVR has stopped recording If hard disk drive is full, you will either need to delete
video or set the DVR to the Overwrite Mode.
The icon displays,
however, the DVR is not
recording.
When the DVR is in the Pre-Event recording mode,
the yellow
and display when there is no
event, and the DVR is not recording. The red and
display when any event occurs and the DVR
starts recording.