Honeywell HRSD16 User Manual
Page 37
Configuration
Document 800-00918
Rev F
37
02/08
Figure 3-5
Information Screen
2.
Highlight the Site field in the Information screen and press
. A virtual keyboard
appears that you can use to enter a Site Name.
3.
Highlight Close and press
once you have entered your title.
4.
Highlight the field beside System ID and press
. To change the number,
highlight it and use the Up and Down arrows to choose from 0 to 99.
Note
The System ID number is used to identify the unit when it is
connected with other DVRs through the RS485 port. You cannot
use the same ID number for two or more DVRs that are in the
same RS485 network. It is possible to have multiple DVRs with
System ID of 0 that are in the same area as long as they are not
part of an RS485 network.
5.
Highlight the field beside Language and press
. A drop-down menu displays
the available languages. Highlight the desired language and press
.
The field beside Version displays the software version of the DVR.
Upgrading the System Software
1.
Connect to the DVR a USB device that contains the upgrade package file.
2.
Highlight Upgrade… in the Information screen and press
. The Upgrade
screen appears.
Figure 3-6
Upgrade Screen