Setting up the network – Honeywell HRSD16 User Manual

Page 51

Advertising
background image

Configuration

Document 800-00918

Rev F

51

02/08

Setting up the Network

Highlight Network in the Network menu and press

. The Network setup screen

displays. In the Network Setup screen, you are able to change the Network, LAN,
Modem, and DVRNS settings.

Figure 3-23

Network Setup Screen

Configuring the Network

1.

Highlight the first field beside Transfer Speed. Press the Up and Down arrows to
set the Transfer Speed from 50 Kbps to 100 Mbps.

2.

Highlight the second field beside Transfer Speed. You can select the unit of
measure for the transfer speed between: bps and ips. Press

to set the unit of

measure.

3.

Highlight the field beside Quality and press

. You can select the Quality from:

Very High, High, Standard, and Basic.

4.

Press

to set the Quality.

Note

The higher Quality settings require higher Transfer Speed
settings. The transfer speed you set is the maximum speed.
Depending on the network environment, this speed may not be
achieved.

Note

The local recording speed might be affected by various network
bandwidth (Transfer Speed) conditions.

Advertising