Honeywell HRSD16 - Manual (Page 56)

Configuration
56
Note If the RS-232C port is in use for remote control, networking
cannot be configured for a modem.
DVRNS Setup
Highlight the DVRNS tab in the Network screen. The DVRNS screen appears.
Figure 3-29 DVRNS Setup Screen
Table 3-5 Modem Setup Screen Options
Option Action
Enable Highlight Enable and press to toggle between On and Off.
You can only change the settings if Modem is enabled.
Baud Rate Highlight the field beside Baud Rate and press . A list of
baud rates ranging from 300 to 115,200 appears.
Data Bit Highlight the field beside Data Bit and press . Choose
between 7 bit and 8 bit formats.
Stop Bit Highlight the field beside Stop Bit and press . Choose
between 1 and 2 Stop Bits.
Parity Highlight the field beside Parity and press . A drop-down
list appears. You can select from None, Odd, or Even parity.