Honeywell HRSD16 User Manual
Page 62
Configuration
62
Note
If you select Covert 1, the DVR displays the camera title and
status icons on the covert video.
If you select Covert 2, the DVR displays only the camera title on
the covert video.
Note
A user who does not have Covert Camera View authority cannot
view video from cameras set to Covert 1 or Covert 2. This
applies to both the live monitoring mode and the playback.
Adding a Camera to the PTZ List
1.
Highlight the PTZ tab, and the PTZ setup screen displays.
Figure 3-34
Camera PTZ Setup Screen
Note
You can only set up PTZ devices if the PTZ port is set to
RS-232C or RS485. You can not use a modem if you are using
the RS-232C port for PTZ control.
2.
Highlight the field in the Product column for the PTZ camera you wish to
configure and press
. A list of PTZ devices appears.