Honeywell HRSD16 - Manual (Page 70)

Configuration
70
Figure 3-43 Spot Monitor Screen
2. Highlight the field in the Channels column and press . The Spot Monitor 1:
Channels screen appears.
3. Select the cameras you want in the sequence by using the UP and DOWN arrows
to scroll through the list. Press
to toggle the cameras On and Off.
4. Select the Dwell time by highlighting that field and pressing . You can select
from 1 to 20 seconds.
Save your Display settings by highlighting Save and pressing . Select Cancel to
exit the screen without saving the changes.
Remote Control Screen
With the Remote Control Setup screen, you can select a port and make correct settings
for a remote keyboard.
1. Highlight Remote Control in the Devices menu and press .
Figure 3-44 Remote Control Setup Screen