Honeywell HRSD16 - Manual (Page 96)

Configuration
96
Figure 3-70 Text-In Actions 2 Screen
Selecting PTZ Presets
You can preset the position for each PTZ camera and to where you want each PTZ
camera to move whenever the DVR detects text input.
1. Highlight the desired field under the PTZ heading, and press . A list of PTZ
presets appears.
2. Select the PTZ preset from the list.
Associating Spot Monitors with Cameras
A Spot monitor can be associated with a camera. The DVR displays the associated
camera on the Spot monitor whenever it detects text input.
1. Highlight the desired field under the Spot Monitor heading, and press . A list
of Spot monitors and cameras appears.
2. Select from the list of spot monitors and cameras.
Save your Text-In changes by highlighting Save and pressing . Select Cancel to
exit the screen without saving the changes.
System Event Screen
Using the System Event screen, the DVR can be configured to run self-diagnostics and
report the results.You can set the DVR to check the system, recording, and Alarm-In
activities.
Highlight System Event in the Event menu and press . The System Event - Health
Check setup screen appears.