Honeywell HRSD16 User Manual

Page 98

Advertising
background image

Configuration

98

4.

Select the Day field and press

to change the day. A menu appears with

choices from individual days from Sunday to Saturday, Monday-Friday,
Holidays, and All. Scroll to choose the setting, and press

to select.

5.

Select the Range field and press

to change the time range. The Range uses a

24-hour clock, and adjusts in 15 minute increments.

6.

Highlight the Interval field, and press

to change the interval that you want the

DVR to run self-diagnostics on recording. A list appears from which you can select
1 hr. to 30 days or Never.

7.

Select to delete a schedule.

8.

Select OK and press

to save the changes.

Setting an Automatic Alarm-In Check

Select the Alarm-In port you want to check by highlighting the corresponding field in the
Interval column and pressing

. A list appears from which you can select 1 hr. to 30

days or Never.

Setting Up Automatic Storage Check-Up

Highlight the Storage tab. The System Event Storage screen displays.

Figure 3-73

Storage Screen

Checking for Bad Sectors on the Disk

1.

Highlight the field beside Disk Bad Notify and press

.

2.

Select the percentage level of bad disk sectors at which you want the DVR to
trigger an alert. Percentage levels range from 10% to 90%.

Setting a Disk Almost Full Notification

1.

Highlight the field beside Disk Almost Full Notify and press

.

2.

Select the percentage level of disk usage at which you want the DVR to trigger an
alert. Percentage levels range from 80% to 99%.

Advertising