HP 3740 series - Manual (Page 17)

Preparing to print
1. Slide the paper guide to the left.
2. Place the photo paper, with the side to be printed on facing down and the short
edge pointing towards the printer, in the right side of the tray. If you are using
photo paper that has a tear-off tab, verify that the tab is pointing away from the
printer. Push the paper into the printer until it stops.
3. Slide the paper guide firmly against the edge of the paper.
Printing
1. Open the Page Setup dialog box, and then select the following settings:
• Paper Size: The appropriate borderless paper size
• Orientation: The appropriate orientation
2. Click OK.
3. Open the
Print dialog box.
4. Select the Paper Type/Quality panel, and then select the following settings:
• Paper Type: The appropriate photo paper type
• Quality: Best or Maximum dpi
HP Deskjet 3740 series printer User's Guide
17