Honeywell PERFECT WINDOW ER200 - Manual (Page 9)

9 69-1188—03
Troubleshooting
Lack of power to the ventilator:
• Power failure of electrical box.
• Loose or unplugged power cord.
• Faulty breaker or fuse in home’s electrical panel.
• Call your installation contractor.
Power to the ventilator, but no fan operation:
• Ventilator is in standby mode and optional remote dehumidistat is set to OFF or the
humidity setting is higher than room humidity.
• Door is not closed properly, the safety interlock switch will keep the ventilator off.
Check that the access door is firmly closed and latched.
• Refer to operating instructions.
• Call your installation contractor for service.
69-1188_A.fm Page 9 Wednesday, January 27, 2010 7:25 AM