Honeywell TE831W-2 User Manual

Page 13

Advertising
background image



13

A. UP

- Selects the next available window counter-clockwise

- Increases parameters

-If depressed and held, activates an atomic time signal search

B. DOWN

- Selects the next available window clockwise

- Decreases parameters

-If depressed and held, activates all remote sensors signal search

C. SET

- Alternates the parameters for the selected window

- If depressed and held, enters into the programming mode or

changes parameter’s units

- Pressed again closes programming mode and confirms selected

parameters

D. CHANNEL

- Manually selects the channel # for receiving temperature and

humidity sensor data

- Enables the temperature and humidity channel auto-scan mode

E. MEMORY

- Records: moon phase, temperature, humidity, rainfall and wind

records. Then stores in memory

- Moon phase: Determined by the day of month interval

- Sets and stores pressure & altitude units in Memory

F. HISTORY

- Allows displaying the sea-level pressure history

G ALARM/CHART

- Displays alarm times and programmed alerts for temperature,

rainfall and wind.

- Press and hold, to enter the alarm/alert programming mode

- Press and hold in pressure and forecast window, to view

different bar charts

H. SENSOR

– AUTO, ON, OFF

- Sets the light sensor to: automatic, on or off

I. SENSITIVITY

– HIGH/LOW

- Adjusts the automatic light sensor sensitivity

J LIGHT/SNOOZE

- Illuminates the display backlight for 5 seconds

- Activates Snooze delay for alarms (programmable 1 to 15

minutes)

K. AC/ DC

ADAPTOR INPUT

- Connects main unit to the power outlet through the AC to 7.5V

DC adapter provided

L. USB Port

- USB Port provides PC connectivity

Advertising