Precautions – Honeywell TE831W-2 User Manual

Page 29

Advertising
background image



29

Check or replace the batteries for the corresponding sensor. Then press and hold DOWN arrow button on the main unit to
search for all remote signals. If this does not work, check the wireless transmission path from the corresponding sensor to the
main unit and change locations to improve reception. Wireless signals pass through solid objects and walls, however,
whenever is possible the sensor should be within line-of-sight with the main unit.
The following may cause reception problems:

• The remote weather sensor and a main unit are too far from each other.
• The signal shielding materials, such as metal surfaces, concrete walls or dense vegetation, are in the path of

transmission.

• Interference from wireless devices such as: cordless phones, radio headsets and baby listening devices or electronic

appliances.

Q: “My weather station readings are different from TV, radio or official weather reports.”
A:
The weather data may vary considerably due to different environmental conditions and placement of the remote sensors.
If readings are in question, check the sensor placement tips included in this manual.
Q: “The weather forecast is inaccurate.”
A:
Weather forecast predicts the weather for the next 12 to 24 hours, and does not reflect current weather conditions.

PRECAUTIONS

This product is engineered to give you years of satisfactory service if handled carefully. Here are a few precautions:

• Do not immerse the units in water.
• Do not clean the units with abrasive or corrosive materials that might scratch plastic parts or corrode electronic

circuits.

• Do not subject the product to excessive force, shock, dust, temperature, or humidity, which may result in malfunctions,

shorter lifespan, damaged batteries, and damaged parts.

• Do not tamper with the product’s internal components. Doing so will invalidate the warranty and may cause damage.

The product contains no user-serviceable parts.

• Use only fresh batteries. Do not mix new and old batteries.
• Read the user's manual thoroughly before operating the product.

Advertising