Husqvarna 140 - Manual (Page 32)

32 – English
TECHNICAL DATA
1154580-38 Rev.1 2011-12-05
Guide bar and saw chain combinations
The following cutting attachments are type approved for the models Husqvarna 135, 135e, 140, 140e and 140e
TrioBrake.
Saw chain filing and file gauges
EC-declaration of conformity
(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service Husqvarna 135, 135e, 140, 140e and 140e TrioBrake from 2011’s serial numbers and onwards
(the year is clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the
requirements of the COUNCIL’S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 ”relating to electromagnetic compatibility” 2004/108/EC.
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100-2/A1:2009, CISPR 12:2007, EN ISO 11681-1:2008
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried
out EC type examination in accordance with the machinery directive’s (2006/42/EC) article 12, point 3b. The certificates
for EC type examination in accordance with annex IX, have the numbers: 0404/11/2306 - 135, 135e, 0404/11/2337 - 140,
140e, 140e TrioBrake.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity
with annex V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
The certificates have the numbers: 01/161/092, 01/161/097.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna December 8, 2011
Bengt Frögelius, Development director chainsaw R&D (Authorized representative for Husqvarna AB and responsible for
technical documentation.)
Guide bar Saw chain
Length, inch Pitch, inch Gauge, mm Max. nose radius Type
Length, drive links
(no.)
14 3/8 1,3 9 T Husqvarna H36,
Husqvarna H37
52
16 3/8 1,3 9 T 56