Husqvarna DM 340 - Manual (Page 6)

6 – English
SAFETY INSTRUCTIONS
Steps before using a new drilling
machine
• Do not use the drilling machine without first reading and
understanding the contents of this Operator’s Manual.
• DM 340 is an electric stand drill, intended for drilling holes
in concrete, bricks and various stone materials.
• The machine is intended for use in industrial applications
by experienced operators. Use in any other way is
considered as contrary to the intended use.
Always use common sense
It is not possible to cover every conceivable situation you can
face when using a drilling machine. Always exercise care and
use your common sense. Avoid all situations which you
consider to be beyond your capability. If you still feel uncertain
about operating procedures after reading these instructions,
you should consult an expert before continuing. Do not
hesitate to contact your dealer or us if you have any more
questions about the use of the drilling machine. We will
willingly be of service and provide you with advice as well as
help you to use your drilling machine both efficiently and
safely.
Let your Husqvarna dealer check the drilling machine
regularly and make essential adjustments and repairs.
Husqvarna Construction Products has a policy of continuous
product development. Husqvarna reserves the right to modify
the design and appearance of products without prior notice
and without further obligation introduce design modifications.
All information and all data in the Operator’s Manual were
applicable at the time the Operator’s Manual was sent to print.
Personal protective equipment
• Protective helmet
• Hearing protection
• Protective goggles or a visor
• Breathing mask
• Heavy-duty, firm grip gloves.
• Tight-fitting, heavy-duty and comfortable clothing that
permits full freedom of movement.
• Boots with steel toe-caps and non-slip sole.
• Always have a first aid kit nearby.
!
WARNING! Under no circumstances should
you modify the original design of the
machine without approval from the
manufacturer. Always use original spare
parts. Unauthorized modifications and/or
accessories may lead to serious injury or
death to the user or others.
!
WARNING! The use of products such as
cutters, grinders, drills, that sand or form
material can generate dust and vapours
which may contain hazardous chemicals.
Check the nature of the material you intend
to process and use an appropriate breathing
mask.
!
WARNING! You must use approved personal
protective equipment whenever you use the
machine. Personal protective equipment
cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident
does happen. Ask your dealer for help in
choosing the right equipment.