Harris Performance 7000 - Manual (Page 41)

6800/7000 Series - Frames and Power Supplies Installation and Operation Manual 15
FR-6804(-1)/CF-6801 Installation Chapter 3: FR-6804/FR-6804-1 Frames
4. Attach the other end of the DC supply cable to the DC 5-pin
connector at the back of the CF-6801 cooling frame, observing
correct polarity.
5. Position the FR-6804(-1) and the CF-6801 frames at the front and the
back so that the vents are aligned.
6. Plug the main power cable into the left power receptacle in the back
of the FR-6804(-1).
7. Plug the other end of the main power cable into the studio power
supply outlet.
To verify correct installation, follow this procedure:
1. Check that leftmost green Power LED on the FR-6804(-1) front panel
is lit.
2. Check that most left green Power LED on the CF-6801 front panel is
lit.
3. Check that the CF-6804 begins to emit a soft humming noise as the
fans engage.
4. Check that air is being drawn in through the front panel of the
FR-6804(-1).
See Chapter 4, “CF-6801 Cooling Frame” for further information on
installing the FR-6804(-1) with the CF-6801 Cooling Frame.