Enww solve image-quality problems 213 – HP CM1312 MFP Series User Manual

Page 225

Advertising
background image

Problem

Cause

Solution

More than one sheet feeds at one
time.

The media tray might be overloaded.

Remove some of the media from the tray.
See

Load paper and print media

on page 58

.

The media might be wrinkled, folded, or
damaged.

Verify that the media is not wrinkled, folded,
or damaged. Try printing on media from a
new or different package.

The product does not pull media
from the media input tray.

The product might be in manual feed mode.

If Manual appears on the product
control-panel display, press

OK

to print

the job.

Verify that the product is not in manual
feed mode and print your job again.

The pickup roller might be dirty or damaged. Contact HP. See

www.hp.com/support/

CM1312series

or the support flyer that came

in the product box.

The paper-length adjustment control in
tray 2 or optional tray 3 is set at a length that
is greater than the media size.

Adjust the paper-length adjustment control
to the correct length.

ENWW

Solve image-quality problems 213

Advertising
This manual is related to the following products: