20 chapter 2 control panel enww – HP CM1312 MFP Series User Manual

Page 32

Advertising
background image

Menu item

Sub-menu item

Sub-menu item

Description

PowerSave Time

Off

1 minute

15 minutes

30 minutes

1 hour

2 hours

4 hours

Specify the amount of idle time
before the product enters sleep
mode.

USB speed

High

Full

Sets the USB speed.

Less paper curl

On

Off

When printed pages are
consistently curled, this option
sets the product to a mode that
reduces curl.

The default setting is Off.

Archive print

On

Off

When printing pages that will
be stored for a long time, this
option sets the product to a
mode that reduces toner
smearing and dusting.

The default setting is Off.

Restore defaults

Sets all customized settings to
the factory default values.

Table 2-7

Network configuration menu

Menu item

Sub-menu item

Description

TCP/IP configuration

Automatic

Manual

Automatic automatically configures all the TCP/IP settings via
DHCP, BootP or AutoIP.

Manual requires you to manually configure the IP address, subnet
mask, and default gateway.

The control panel prompts you to specify values for each address
section. Use the arrow buttons to increase or decrease the value.
Press

OK

to accept the value and move the cursor to the next field.

As each address is completed, the product prompts for address
confirmation before moving to the next one. After all three
addresses are set, the product automatically restarts.

Memory Card (memory
card products only)

On

Off

Enables or disables the use of the memory card slots.

Auto crossover

On

Off

Enable or disable the use of a standard 10/100 network cable when
the product is directly connected to a PC.

Table 2-6

Service menu (continued)

20

Chapter 2 Control panel

ENWW

Advertising
This manual is related to the following products: