Set password, Ip address, Manual configuration – HP CM1312 MFP Series User Manual

Page 62: Automatic configuration, Set password ip address

Advertising
background image

Manual Subnet Mask

Manual Default Gateway

NOTE:

Changing the network configuration might require you to change the browser URL before you

can communicate with the product again. The product will be unavailable for a few seconds while the
network resets.

Set password

See

Turn on password protection from the control panel on page 172

for information on how to set the

product passwordl.

IP address

The product IP address can be set manually, or it can be configured automatically via DHCP, BootP, or
AutoIP.

Manual configuration

1.

On the control panel, press

Setup

.

2.

Use the arrow buttons to select Network configuration, and then press

OK

.

3.

Use the arrow buttons to select TCP/IP configuration, and then press

OK

.

4.

Use the arrow buttons to select Manual, and then press

OK

.

5.

Use the alphanumeric buttons to type the IP address, and then press

OK

.

6.

If the IP address is incorrect, use the arrow buttons to select No, and then press

OK

. Repeat step

5 with the correct IP address, and then repeat step 5 for the subnet mask and default gateway
settings.

Automatic configuration

1.

On the control panel, press

Setup

.

2.

Use the arrow buttons to select Network configuration, and then press

OK

.

3.

Use the arrow buttons to select TCP/IP configuration, and then press

OK

.

4.

Use the arrow buttons to select Automatic, and then press

OK

.

It may take several minutes before the automatic IP address is ready for use.

NOTE:

If you want to disable or enable specific automatic IP modes (such as BOOTP, DHCP, or

AutoIP), these settings can be changed by using the embedded Web server or HP ToolboxFX only.

Display the IP address on the control panel

1.

On the control panel, press

Setup

.

2.

Use the arrow buttons to select Network configuration, and then press

OK

.

3.

Use the arrow buttons to select Show IP address, and then press

OK

.

50

Chapter 5 Connectivity

ENWW

Advertising
This manual is related to the following products: