Hisense Group KFR 25GWE - Manual (Page 12)

Adjusting the Fan Speed
AUTO
AUTO
A. Automatic
Simply set the FAN SPEED selector to the position.
A microcomputer in the air conditioner automatically controls the fan speed when the mode is selected. When the air
co nditioner starts operating, the difference between the room temperature (RT) and the set temperature (T) is detected by
the microcomputer which then automatically switches the fan speed to the most suitable level.
RT T+3
T+3 RT T+1
RT T+1
Cooling mode:
When difference between room temperatureand set
temperature is
FAN SPEED
High
Medium
Low
RT T+5
T+5 RT T+3
Rt T+3
Mild drying mode:
When difference between room temperature
and set temperature is
FAN SPEED
High
Medium
Low
RT T-3
T-3 RT T-1
T-1 Rt T
Heating mode:
When difference between room temperature
and set temperature is
FAN SPEED
High
Medium
Low
The above table assumes that the sensor on the remote control is being used. If the sensor in the indoor unit is
being used (the indicator is on), actual operation may differ slightly from the operation described in table.
NOTE
B. Manual
If you want to adjust fan speed manually during operation, just set the FAN SPEED selector
as desired.[ (High), (Medium), or (Low)]
10