Hawking Technology 108G - Manual (Page 13)

13
button to start installing the TCP/IP protocol. You may need your Windows CD to
complete the installation.
5: After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of
Network Protocols and then click the Properties button.
6: Check each of the tabs and verify the following settings:
•
IP Address: Select Obtain an IP address from a DHCP server.
•
DNS: Let all fields are blank.
•
WINS: Let all fields are blank.
•
Routing: Let all fields are blank.
7: Click OK to confirm the setting. Your PC will now obtain an IP address automatically
from your Hi-Gain Wireless-108G MIMO Router’s DHCP server.
Note: Please make sure that the Hi-Gain Wireless-108G MIMO Router’s DHCP server is
the only DHCP server available on your LAN.
Once you’ve configured your PC to obtain an IP address automatically, please proceed to
Step 3.