Hawking Technology 108G User Manual
Page 44
44
Wireless Modes: AP Bridge-Point to Point
AP Bridge-Point to Point mode allows you to add another Hawking HWRGM1A to your
network to act as a wireless relay to another section of your home. To do this you will
need to enter the MAC address of the HWRGM1A that you are adding into your network.
To find the MAC address of your router simply go to STATUS from the top menu in the
web interface. Click on Device Status from the left navigation bar. View the MAC
Address information in this section.
You can then copy and paste this information into the “Main” router that is currently
connected to your broadband connection and use the other to repeat your network.
The Airport Express may also work using this mode by entering the Airport ID in place
of the MAC Address. However this is not always guaranteed to work.