Hawking Technology 108G User Manual
Page 45
45
Wireless Modes: AP Bridge-Point to Multi-Point
AP Bridge-Point to Multi Point mode allows you to add a few Hawking HWRGM1A’s to
your network to act as a wireless relay to other sections within your home. To do this
you will need to enter the MAC addresses of the HWRGM1A’s that you will be adding
into your network. To find the MAC address of your router simply go to STATUS from
the top menu in the web interface. Click on Device Status from the left navigation bar.
View the MAC Address information in this section.
You can then copy and paste this information into the “Main” router that is currently
connected to your broadband connection and use the other to repeat your network.
The Airport Express may also work using this mode by entering the Airport ID in place
of the MAC Address. However this is not always guaranteed to work.