Havis-Shields PRM97473 - Manual

KK-K9-FAN-INST-4-05
INSTALLATION INSTRUCTIONS KK-K9-FAN
OPTIONAL FAN FOR K-9 TRANSPORTATION SYSTEMS
HARDWARE:
QTY DESCRIPTION PART#
1
95 CFM 12 Volt Boxer Fan PRM97422
2 Grill guard PRM97473
4 8-32 x ½” Phillips Machine Screw GSM33110
4 8-32-x ¾”Phillips Machine Screw GSM33111
8 8-32 Keps Nuts GSM30027
1 Wire Kit HS-WK-2
INSTALLATION:
1. Fan location to be determined by installer/customer.
2. The fan is designed to mount in many various locations. It can be simply mounted on the upper
perforated section or a hole can be cut out in the ceiling or lower wall.
3. After location is determined, the fan and housing will go on the exterior side of the K9
compartment. Drill (4) 3/16” mounting holes and bolt assembly.
4. Wire to fan switch and 12 volt power source.