HONDA Submersible Pump WSP33AA - Manual (Page 12)

10
Step 5. Plug in the pump and fill the sump basin with water. The pump should turn on
when the water level reaches 13'' to 14''. If it does not turn on at the 13'' to 14''
water level, remove the float cord from the clip and re-attach it in a higher or
lower position so that the pump turns on at the 13'' to 14'' water level.
Step 6. Perform several ON-OFF cycles to assure satisfactory operation.
Performance Table (Capacity in Gallons per Minute)
Pump
Total Head
5 10 15 20 25 30 35 40 45 50
WSP33K1AA 40 33 25 15
WSP53AA 73 67 60 51 40 27 9
WSP73AA 74 67 58 49 39 27 16
CLIP
MOVE
CORD
UP OR
DOWN
FLOAT CORD