Watermax filters application chart – Hague Quality Water Intl 63MAQ User Manual

Page 16

Advertising
background image

WaterMax Filters

61 AAN

61 AAE

-BWO

61 AAR

-BWO

61 AAS

-BWO

61 AAF

-BWO

10,000

N/A

N/A

N/A

N/A

5

N/A

N/A

N/A

N/A

20

N/A

N/A

N/A

N/A

7

N/A

N/A

5

'

N/A

Manganese

Greensand

Activated Carbon

Filter Ag

Calcite/Corsex

multi-Grade

1.25

1

1.25

1.25

1

6

6

6

6

6

10

10

10

10

12

7

5

5

7

7

.5

N/A

N/A

N/A

N/A

30-120

30-120

30-120

30-120

30-120

1

1

1

1

1

5

7

7

7

7

45

0

0

0

0

3

0

0

0

0

3

0

0

0

0

4 oz.

KMnO4

N/A

N/A

N/A

N/A

16.7 GPM

21.4 GPM

21.5 GPM

20.4 GPM

19.4 GPM

10.5 GPM

15.9 GPM

15.9 GPM

15.2 GPM

15.1 GPM

4.5 GPM @

4.7 PSI

3.6 GPM @

1.1 PSI

4.5 GPM @

1.5 PSI

4.5 GPM @

1.8 PSI

3.6 GPM @

1.5 PSI

Removes iron

Removes

Removes

Will raise the

Removes

and iron algae.

tastes, odors

suspended

pH of most low

suspended

Also removes

and will reduce

matter

pH water. The

matter

up to 5 ppm

most man-

(turbidity) from

mineral media

(turbidity) from

Hydrogen

made

water down to

must be

water down to

Sulfide with

pollutants.

the 20-40

replenished

nominal 20

the presence

Backwash

micron range.

periodically to

microns.

of 2 ppm iron.

every 3 days

Backwash

maintain

Backwash

Regenerate

or as needed.

every 3 days

optimum bed

every 3 days

every 6 days

or as needed.

depth for

or as needed.

for iron; as

WARNING!

effective

needed for

Must not

Must not be
backwash ed

correction.

Hydrogen

Backwash

Sulfide

for 24 hours

every 2 days to

(sulfur),

after

prevent

installation.

solidification of

1

The 61AAS-BWO will raise the pH of most, but not all low pH water. Some water requires

chemical injection using a chemical feed pump.

2

CAUTION: follow the instructions on the KMnO4 container.

3

For optimum water quality, do not exceed recommended service flow rate for filter media type.

WaterMax Filters

Application Chart

Capacity (ppm)

Sulphur H

2

S (2 ppm)

Iron (ppm)

Minimum pH

Media type

Media amount (cu. ft.)

Cont. flow rate (gpm)

Peak flow rate (gpm)

Backwash rate (gpm)

Brine line flow control (gpm)

Water pressure

Mode settings

Backwash #1 (min)

Brine/rinse (min)

Backwash #2 (min)

Salt (lbs.

3 b. a It setting = 4oz. KMnO4

2

Regenerant used

Flow rate at 25 PSI drop

Flow rate at 15 PSI drop

Recommended service flow

3

@

pressure drop

16

Advertising
This manual is related to the following products: