Hague Quality Water Intl 63MAQ - Manual (Page 34)

Parts —
Figure 13 - Brine Valve Elbow Installation
0
.
a
1 /2" Retainer
Sleeve
The nut, gripper and retainer sleeve are
a 3 piece assembly that can come apart
if removed from the elbow body. Parts
must be re-assembled exactly as shown
to function properly.
When connecting the 3/8" polytube, it is
first necessary to assemble the nut,
gripper and retainer sleeve on the tub-
ing before inserting the plastic insert.
Screw the nut on the elbow body. With
a wrench tighten nut securely to create
a pressure tight connection.
3/8" Plastic Gripper
34