Hague Quality Water Intl 63MAQ - Manual (Page 6)

Installation Guide 8z Start-up Procedure
Figure 1
From Meter
From Well
Cold Water
r
Hot Water
Drain Line
Water
Heater
C7WATERIIAX
Pressure Tank
r
Maintain a min. 2 in. air gap
Use this diagram as a location and installation guide for your 60 Series water conditioner.
To simplify installation and servicing, your WaterMax appliance includes a bypass valve
required by the uniform plumbing code. A bypass system also provides access to untreated
water when required (i.e. for lawn and gardening purposes.) See page 5.
Installation tip: if the installation includes backfeeding the water heater for soft water service,
a minimum of 10 feet of pipe is recommended between the outlet of the appliance and the inlet
of the water heater. This reduces the potential for hot water backup into the
WaterMax.
(Check the local plumbing code for compliance.)
6