Panasonic KX-TD500 - Manual (Page 157)

Group
Programming Guide 157
Parameter Search Mode
Default UCD
Value Range 1. UCD
2. Sequential
Description/Function Specifies the search mode for extensions.
(Assignable only when "Operator (Single)" or "UCD" is specified
in "Group Type" programming.)
1. UCD:
The system selects the extension following the last one called as
the destination extension.
2. Sequential:
The system selects the extension assigned first in the Incoming
Group as the destination extension.
Reference • 1.3 System Features (F/G)
– Incoming Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)
• 1.6 Originating Features (F/G)
– Operator Call
Parameter Calls to Empty Group
Default Disable
Value Range 1. Enable
2. Disable
Description/Function Allows for calls to empty (all Logout) Operator or UCD Groups to
be queued.
If enabled, calls will be queued to the group.
If disabled, the extension will receive a reorder tone, and the CO
call will be transferred to the overflow destination immediately.
(Assignable only when "Operator" or "UCD" is specified in "Group
Type" programming.)
Reference • 1.3 System Features (F/G)
– Incoming Group
– Operator Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)