Panasonic KX-TD500 - Manual (Page 170)

Line
170 Programming Guide
Trunk Line Copy
Used to copy a part of or all settings of a certain Trunk Line to all other same type Trunk Lines
at a time. You can also specify one or several Trunk Lines as the copy destination. This copy
function is available between the Trunk Lines of the same type Trunk Cards.
Copying the Trunk Line Parameters to Other Trunk Lines
1. Edit the parameters of the copy source Trunk Line and save it.
2. Point to the "Copy" button on "4-1 Trunk Line" screen of the copy source and click.
• "Trunk Line Copy" screen is displayed.
• The current Trunk Line (copy source) number is shown as "Copy from XXX XXXXX-
XX."
3. Select the Trunk Line parameters to copy in "Copy Item" field.
• Only parameters which are available to copy are shown in "Copy Item" field.
This depends on the attribute of the copy source Trunk Line.
• Items marked with " " are copied.
4. Point to the "Select All" button in the "Destination Trunk Line" field and click.
• All displayed Trunk Line Nos. will be highlighted.
• You can also specify one or several Trunk Lines as the copy destination by clicking it
(them) directly.
5. Point to the "Execute" button and click.
• "Are you sure?" is displayed.
6. Point to "Yes (Y)" button and click.
• "Copying" is displayed while the source data is being copied to the destination.
• Parameters of the destination Trunk Lines are immediately effective when copying is
finished.