Panasonic KX-TD500 User Manual
Page 172
Line
172
Programming Guide
Parameter
Name
Default
CO001-CO192
Value Range
Up to 10 characters consisting of 0-9, A-Z, a-z or the following
marks: ! # $ %
( ) + , - / : ; < = > ? @ &.
Description/Function
Specifies the name for the trunk line.
Note
•
This is shown on a display PT when receiving a call using
this trunk.
Reference
• 1.17 Display Features (F/G)
– Display, Call Information
Parameter
Incoming Type
Default
(1)DIL: ELCOT / GCOT / LCOT / PCOT / RCOT / T1 [GCO] / T1
[LCO] card (2)DID: DID / DID-2W / DID-MFC / E1 [DR2] / E1
[E&M-C (MFC-R2)] / E1 [E&M-P (MFC-R2)] / T1 [DID] card
(3)TIE: E1 [E& M-C (Pulse, DTMF)] / E1 [E&M-P (Pulse,
DTMF)] / E&M / T1 [TIE] card (4)DDI: BRI / PRI23 / PRI30 card
Value Range
1.
DIL
2.
DID
3.
TIE
4.
DDI
5.
MSN
Description/Function
Specifies how the incoming CO call via this trunk line is routed to
the destination in the system.
1.
DIL
Incoming CO calls are routed by DIL (Direct In Lines) 1:1 or
1:N feature.
2.
DID
Incoming CO calls are routed by DID (Direct Inward Dialling)
feature.
3.
TIE
Incoming CO calls are routed by TIE Line feature.
4.
DDI
Incoming CO calls are routed by ISDN DDI (Direct Dialling In)
feature.
5.
MSN
Incoming CO calls are routed by ISDN MSN (Multiple
Subscriber Number) feature.