Panasonic KX-TD500 - Manual (Page 237)

Line
Programming Guide 237
Parameter [CLIP / COLP Number] Private
Default Blank
Value Range Up to 16 digits consisting of 0-9, or #
Description/Function Specifies a CLIP/COLP or ANI (Automatic Number Indication)
number used for the incoming / outgoing calls via Private Network
to each PC Console.
Notes
• The KX-TD500 System is designed and manufactured in
accordance with the following ETS (European
Telecommunication Standard) specifications: ETS 300 122
Generic Keyboard protocol for the support of
supplementary services.
• Specify the registered Central Office calling number for
correct operation of CLIP and COLP.
Reference • 2.2 ISDN Originating Features (F/G)
– Calling Line Identification Presentation (CLIP)
• 2.3 ISDN Answering Features (F/G)
– Connected Line Identification Presentation (COLP)
• 3.3 Network Service Features (F/G)
– Calling Line Identification Presentation (CLIP)
– Connected Line Identification Presentation (COLP)
• 2.7.5 Displaying Your Number on the Called Party and Calling
Party's Telephone (Calling/Connected Line Identification
Presentation [CLIP/COLP]) (U/M)
Parameter [Call Log Incoming] Overwrite Mode
Default Yes
Value Range 1. Yes
2. No
Description/Function Enables or disables Call Log Incoming, Overwrite Mode.
If the Call Log is full (30 call records are already logged) when a
new Caller ID call comes in.
1. Yes : The new call record overwrites the oldest one in the Call
Log.
2. No : The new call record is not logged.
Reference • 2.10.1 Calling Using the Call Log (Incoming Call Log) [KX-
T7433, KX-T7436, KX-T7230, KX-T7235 only] (U/M)