Panasonic KX-TD500 - Manual (Page 26)

Configuration
26 Programming Guide
Parameter Card No.
Default —
Value Range XXX : T1 [ XXX : Card No. (101-314)]
Description/Function Specifies the physical number of the T1 digital trunk card which
you are going to programme.
Reference • 1.2 Slot Assignment (P/G)
Parameter Channel Type
Default Undefined
Value Range 1. Undefined
2. LCO
3. GCO
4. DID
5. TIE (E&M)
6. OPX
Description/Function Specifies the type of T1 interface per channel.
1. Undefined: Not assigned
2. LCO: Loop Start Central Office
3. GCO : Ground Start Central Office
4. DID: Direct Inward Dialling
5. TIE (E&M): TIE Line
6. OPX: Off Premise Extension
Reference • 1.3 System Features (F/G)
– T1 Carrier
Parameter DN
Default Blank
Value Range 3 - 4 digits consisting of 0-9
Description/Function Specifies the extension for the T1 port.
(Assignable only when "OPX" is specified in "Channel Type"
setting.)
Reference • 2.3 Numbering Plan (P/G)