Panasonic KX-TD500 - Manual (Page 298)

ARS (Automatic Route Selection)
298 Programming Guide
7.5 Digits Modification Table
Used to modify the user-dialled number so that it matches the requirements of the carrier.
Up to 48 Digits Modification entries can be programmed in the system.
Parameter Entry No.
Default 01-08
Value Range 01-48 in 8 entries increments
Description/Function Specifies the entry number of Digits Modification table which you
are going to programme.
Reference • 1.6 Originating Features(F/G)
– Automatic Route Selection (ARS)
Parameter Digits to delete
Default 0
Value Range 0-9
Description/Function Specifies the number of digits to be deleted from the beginning of
the user-dialled number. If you set to "0," no digit is deleted from
the user-dialled number.
Reference • 1.6 Originating Features(F/G)
– Automatic Route Selection (ARS)