Panasonic KX-TD500 - Manual (Page 322)

Maintenance
322 Programming Guide
Parameter Print out Timed Reminder Information
Default Disable
Value Range 1. Enable
2. Disable
Description/Function If this is enabled, SMDR will print out "Timed Reminder / Start"
each time the timed reminder alarm starts ringing. In addition, if the
ringing is not stopped by going off-hook, the SMDR will print out
"Timed Reminder / Answer" or "Timed Reminder / No Answer".
Reference • 1.3 System Features (F/G)
– Station Message Detail Recording (SMDR)
• 1.8 Ringing Features (F/G)
– Timed Reminder (Wake-Up Call)
– Timed Reminder, Remote (Wake-Up Call)
Parameter Print out Account Code
Default Enable (Last Entered Code)
Value Range 1. Enable (First Entered Code, Last Entered Code)
2. Disable
Description/Function Specifies whether or not the Account Code will be printed out by
SMDR.
If this is enabled, SMDR will print out the first entered account
code or the last entered account code when two or more different
account codes are entered during a single call.
Reference • 1.3 System Features (F/G)
– Account Code Entry
Parameter Print out LOGIN / LOGOUT
Default Disable
Value Range 1. Enable
2. Disable
Description/Function Specifies whether or not the Login / Logout status of Extension
Group / Incoming Group members and Phantom extensions will be
printed out by SMDR.
Reference • 1.3 System Features (F/G)
– Station Message Detail Recording (SMDR)
• 1.8 Ringing Features (F/G)
– Log-In/Log-Out