Panasonic KX-TD500 - Manual (Page 87)

System
Programming Guide 87
Parameter DISA Delayed Answer Time
Default 1 ring
Value Range 0-6 rings
Description/Function Specifies the number of rings the system is to wait after receiving a
DISA call before answering it.
Note
• A DISA call is answered after a ringback tone is returned to
the caller after the "DISA Delayed Answer Time" expires.
The DISA caller can dial while hearing the OGM message.
Reference • 1.5 Attended Features (F/G)
– Direct Inward System Access (DISA)
Parameter Timed Reminder Arrive Count
Default 3 times
Value Range 1-5 times
Description/Function Specifies the number of times (1-5) Timed Reminder/Remote
Timed Reminder (Wake-Up Call) is repeated until the destination
extension answers it.
Reference • 1.8 Ringing Features (F/G)
– Timed Reminder (Wake-Up Call)
– Timed Reminder, Remote (Wake-Up Call)
• 2.7.1 Setting the Alarm (Timed Reminder (Wake-Up Call)) (U/M)
• 3.1.1 Setting the Alarm for Other Extensions (Remote Timed
Reminder (Wake-Up Call)) (U/M)
Parameter DISA Automated Attendant Time
Default 1 s
Value Range 1-5 s
Description/Function Specifies the length of time in seconds the system is to wait before
recognising the first digit as a DISA Automated Attendant number.
If this timer expires before the second digit is dialled, the system
assumes that the first digit is a DISA built-in auto attendant number.
Reference • 1.5 Attended Features (F/G)
– Direct Inward System Access (DISA)