Hand Held Products 2070 - Manual (Page 10)

6 Cordless Scanning System Quick Start
IMAGETEAM 3875 Scanner Features
The IMAGETEAM 3875 includes a keypad and display. In addition to having all
of the functionality of the other cordless scanners offered by Hand Held Products,
the IT3875 allows you to key in data and run scripts that are shipped with the
scanner. Two PC tools also are available to help generate custom applications:
IQ App Loader™ or IQ App Designer™. (IT3875XXX-X2-1 and ST2070-5 only)
You may use IQ App Designer to build custom applications with minimal
programming experience.
One of the factory installed scripts shows the history of the past ten scans on the
display. After you scan a bar code and the information is successfully
communicated to the base, the bar code information appears on the top of the
display. Data from the most recent scan appears at the top of the display while
older data moves down one line at a time. The arrow keys may be used to scroll
up and down through the scan history. Once a line is selected, it is highlighted.
You may also run a script that allows you to enter a part number and quantity.
The part number and quantity prompts can be displayed in six languages.
You may enter alphanumeric characters. The most recently scanned message is
stored in its entirety, up to 2710 characters. Older messages are truncated after
63 characters.
The arrow keys can be used to control vertical line scrolling. Use the Function
(FN) key with the up and down arrows to control horizontal character scrolling. If
the selected line is too wide to fit on the display, an arrow appears at the edge of
the display indicating additional characters. To scroll horizontally toward the end
of the line, press FN and then the UP arrow. To scroll horizontally toward the
beginning of the line, press FN and then the DOWN arrow. (Press and release
FN, and then press the arrow key. Pressing and holding the arrow key causes
horizontal scrolling to repeat.)
You may also program up to eleven macro strings to save a sequence of keypad
strokes. In addition you can control the contrast of the display, turn the backlight
on and off, display indicators of the strength of the battery and the radio contact
with the base, change the font size used when running script applications, and
display the System Setup menu. The System Setup menu lets you run factory
scripts, determine to which work group a scanner is associated, display the
scanner ID, and determine scanner software revision information.