Hummer 2006 H3 - Manual (Page 123)

Sunroof
Your vehicle may have a power sliding sunroof. The
ignition must be on or in ACC, or Retained Accessory
Power (RAP) must be active. See Retained Accessory
Power (RAP) on page 2-16.
The switch used to
operate the sunroof
is located in the
headliner.
Open/Close: Press and release the back of the switch
to open the sunroof. If the sunshade is in the closed
position, it will automatically open with the sunroof.
To stop the sunroof before it has reached the full open
position press and release the front or back of the
switch. An air deflector will raise when the sunroof
is fully opened.
Press the front of the switch to close the sunroof.
To stop the sunroof before it is fully closed, press and
release the front or back of the switch.
Vent: Press and hold the back of the switch to vent the
sunroof. To stop the sunroof before it reaches its full
vent position, release the switch.
Do not keep the sunroof open for long periods of time
as debris may collect in the tracks.
Sunshade Operation
The sunshade will open automatically open with the
sunroof.
However, it can manually be pulled shut after the
sunroof is closed. To adjust the sunshade, push it
backward or pull it forward to the desired position.
The sunshade cannot be adjusted further than
the current closed position of the sunroof.
Anti-Pinch Feature
If an object is in the path of the sunroof when it is
closing, the anti-pinch feature will detect the object
and stop the sunroof from closing at the point of
the obstruction. The sunroof will then return to the
full-open or vent position, and the air deflector
will raise.
2-47