Caution – Hummer 2006 H3 User Manual

Page 136

Advertising
background image

Setting Cruise Control

{

CAUTION:

If you leave your cruise control on when you
are not using cruise, you might hit a button
and go into cruise when you do not want to.
You could be startled and even lose control.
Keep the cruise control switch off until you
want to use cruise control.

1. Move the cruise control switch to on.

2. Get up to the speed you want.

3. Press in the set button at the end of the lever and

release it.

4. Take your foot off the accelerator pedal.

The cruise symbol on the
instrument panel will
illuminate when the cruise
control is engaged.

Resuming a Set Speed

Suppose you set your cruise control at a desired speed
and then you apply the brake or step on the clutch.
This, of course, disengages the cruise control. But you
don’t need to reset it.

Once you’re going about 25 mph (40 km/h) or more, you
can move the cruise control switch briefly from on to
resume/accelerate.

You’ll go right back up to your chosen speed and
stay there.

If you hold the switch at resume/accelerate the vehicle
will keep going faster until you release the switch or
apply the brake. So unless you want to go faster, don’t
hold the switch at resume/accelerate.

3-12

Advertising